Elektron Music Machines
17 December, 2025
Download the OS file from the Elektron website to your computer.
Unzip the downloaded file to extract the .swu OS file.
Connect Tonverk to a computer using a USB cable attached to Tonverk’s USB 1 connector.
On the device, navigate to SETTINGS > USB DISK MODE, and then press [YES].
On the popup window, press [YES], but be aware that device playback will stop.
Tonverk’s SD card should now show up in your computer as a USB device. Click the Tonverk USB device on your computer to access the contents of the SD card.
Copy the downloaded and extracted .swu OS file to Tonverk’s SD card and place the file at the root of the SD card’s file structure (not inside any folder).
Safely eject the Tonverk USB device from the computer. Please refer to your computer’s documentation on how to perform this procedure.
On your device, press [NO] to exit USB disk mode.
Navigate to SETTINGS > SYSTEM > OS UPGRADE, and then press [YES]. Tonverk will search through the SD card root for the new OS file. Once the new OS file is detected, press [YES] to start the upgrade process. Tonverk will reboot once the upgrade is finished. Do not turn the power off during the upgrade. Press [NO] if you wish to abort the upgrade and return to the SETTINGS menu.
Note: You can also use a smartphone or tablet to upload a new OS file to Tonverk’s SD card.
Note: Downgrading the device OS is not supported, and is performed at your own risk. User content may be lost.
Should you experience any problems or find any bugs, please report this to Elektron Support: http://www.elektron.se/support
Enjoy!
The Elektron development team
Added the Steel Box Reverb FX machine for Bus, Send FX, and Mix tracks.
Added the Filter Folder FX machine for all tracks.
The Daisy Delay FX machine is now available for all tracks.
The Frequency Warper FX machine is now also available for tracks 1-8.
Added Random playback mode to the arpeggiator.
Added PATTERN MUTE mode.
Gain reduction amount is now shown in the Compressor UI.
Audio combined from inputs A and B is added as a compressor sidechain source.
Added audio from the Bus tracks outputs as a sidechain source for the compressor when placed on the Mix track.
It is now possible to start the sampling in the Recorder by pressing PLAY.
Improved tempo stability when simultaneously receiving clock and large amounts of MIDI data from an external source.
Chord mode now also affects what happens when placing trigs in GRID RECORDING mode or when using STEP EDIT.
The GRAINER SRC machine can now play shorter samples.
Improved the sample loading priority when changing patterns.
Added the [FUNC]+[NO] shortcut to exit the Sample browser.
Active track and parameter page selection, TRIG mode, FILL mode, sequence lane, keyboard octave, transition, and quantization settings are now saved in the project.
Added protection against infinite MIDI All-Sound-Off cycles.
Added control of Global track mutes over MIDI CC (94).
It is now possible to manually cancel the Auto-sampler’s timing test.
Added snap values for the DRY/WET parameters for the FX machines.
Improved the encoder feel for the TRIG PROB parameter.
Minor improvements to the screen UI and messages.
General performance and stability improvements.
The FX LFO 2 depth parameter did not load correctly from presets.
When in GRID RECORDING mode, copying a parameter page incorrectly exited GRID RECORDING mode.
It was not possible to copy a parameter page when an FX track was visible in overlay mode.
Adding micro timing on step 1 on the supertrack could, under some circumstances, delete trigs.
Pasting or recalling a pattern could reset the metronome and recorder settings.
Undo/Redo key combinations could conflict with actions in the sample recorder.
The Filter Stereo Spread (SPRD) parameter on the Grainer SRC machine was not mapped to the correct MIDI CC value.
The FX LFO parameter’s MIDI CC mappings did not work on tracks 1-8.
The MIDI CCs for the IN B parameters controlled the IN A parameters.
The MIDI NRPN controls for the Subtrack’s FLTR page were mapped incorrectly.
Sequencer transport could stall if external MIDI sync was interrupted.
MIDI pitchbend and aftertouch messages were not forwarded to tracks when using the auto channel.
Daisy Delay and Frequency Warper parameters were not saved to presets if they were used in FX slot 2.
Metronome could go out-of-sync with the sequencer when cue-starting the sequencer using [STOP] + [PLAY].
Trig conditions were not reset when cue-starting the sequencer using [STOP] + [PLAY].
Exiting menus by pressing the active parameter page button instead advanced to the next page in the page group.
The Step Edit indicator LED was not illuminated when some menus were active.
Some menus had misleading LED indications on the [ARROW] keys.
Removing the last pattern in a song row created from a chain also deleted the last digit of the previous pattern’s slot number.
Rapidly changing sample slot assignment while playing could cause the device to be temporarily unresponsive.
It was not possible to use the LEVEL/DATA encoder to scroll the LOAD PROJECT section of the FILE menu.
The incorrect sequence lane could be shown as selected after loading a project.
Pasting a track sound could sometimes cause the device to become unresponsive.
Added a new granular SRC machine (Grainer).
Added a new Shape SRC machine for Bus and Send FX tracks.
Added Undo/Redo functionality for paste/clear operations of patterns and track sequences.
It is now possible to preview trigs and notes in GRID RECORDING mode by pressing [TRIG] or [KEYBOARD] + [YES].
The side chain source parameter is now available on the Compressor FX machine on Bus tracks.
It’s now possible to load samples in M4A, CAF, and FLAC file formats.
A POST FX PAN parameter is now added to the FX SETUP MENU for the Audio, Bus, and Send FX tracks.
Added a memory usage entry in file menu.
Improved the sample browser’s look and feel.
Added snap values to the Multi-mode filter’s FREQ and RESO parameters.
The Multi-mode filter's FREQ and RESO parameters are now high-resolution when placed as a FX machine on Bus or Mix tracks.
Clarified that the LFO destinations in the modulation destination list refer to LFO1.
Added the possibility to name multi-sampled instrument during the auto-sampling process.
Improved several of FX machines’ default value settings.
Changed the default retrig value from 1/4 to 1/32.
Minor improvements to the screen UI and LED indications.
General performance and stability improvements.
USB MIDI input and output had timing problems (jitter).
The MIDI SRC machine’s CC selection parameter responded too slowly when adjusted.
Trigs and sequences copied and pasted between subtracks could misplace parameter locks.
The cursor could move past the character limit on the NAMING screen.
Using the recall function or disabling PERFORM mode could reset settings in the MIDI CONFIG menu.
The arpeggiator could play chord notes in the wrong order when retriggered.
The RECEIVE CC setting was disabled by default.
The device did not handle NRPN data.
A number of CC mappings were incorrect.
It was not possible to create a new project from the PROJECT menu if the active project had been corrupted.
The device could become unresponsive when saving a project, showing a “Wait” pop-up.
Notes played manually could disappear if SWING was set very high and the sequencer was running.
Clearing a trig with parameter locks on a Subtracks machine’s supertrack did not actually remove the parameter locks.
Trigs placed on a subtrack could sometimes be displayed on the supertrack.
Changing the track SCALE settings could sometimes cause unpredictable behavior.
It was possible to parameter lock the MIDI machine’s CHAN setting, even though it had no effect.
Copying and pasting a pattern could sometimes cause the device to become unresponsive.
Retriggered notes could sometimes fail to play.
Loading a project with a lot of sequencer data could cause the device to become unresponsive.
Settings made in the Chrono Pitch FX machine were not saved together with the preset.
It was possible to nudge the tempo even if the device was synced to an external MIDI clock.
Muted subtracks affected mute-mode LEDs after switching to a non-Subtracks machine on the same track.
Projects with a large number of parameter locks could lose those locks and sometimes other data when saving the project.
USB DISK mode could be entered while auto-sampling was in progress.
Copying and pasting empty parameter pages on a supertrack caused the unit to become unresponsive.
When loading multiple samples in the Sample browser, they were randomly assigned to the sample slots rather than in alphabetical order.
The sample playhead was difficult to see on dense sample waveforms on the SRC page.
The LEN indicator could be pushed out of view on the Subtracks machine’s SRC page.
Reduced audio/MIDI latency.
DIN MIDI input and output had timing problems (jitter).
There could be timing issues when using DIN MIDI for auto-sampling.
PERFORM mode could, under some circumstances, unexpectedly activate after boot.
Track selection sometimes unintentionally interacted with GRID RECORDING mode.
File names could incorrectly exceed the 256-character limit.
Page randomization now excludes dry/wet (MIX) parameters.
The device diagnostics files are now generated in a different format and are saved inside the DIAGNOSTICS folder on the SD card.
The Supervoid Reverb’s MIX parameter is moved to encoder H on Bus tracks to align with the parameter placement on the other track types.
Updated the signal flow diagram in the TRACK SETUP MOD page to show that Mod Env can modulate LFO 2.
Improved UI visibility by avoiding layering menus on top of one another.
Improved timing for multiple simultaneous keypresses to align with the rest of the Elektron product line.
Added a pop-up warning for when renaming or deleting a file used in the current project.
General performance improvements.
The MIDI Auto Channel setting was not saved in the project.
The device could freeze when using the Transform action PLACEMENT: REVERSE.
The device could freeze when attempting to play a multi-sampled instrument with more than 32 velocity layers.
The PHASE 98 FX machine’s FDBK parameter could, via modulation, be pushed outside its range to produce too loud sounds.
Multi Player and Subtracks instruments could be lost after copying and pasting patterns.
Some characters were not displayed correctly in the NAMING MENU.
The AHD envelope graphics were not displayed correctly.
It was erroneously possible to load presets in PERFORM mode.
The PITCH BEND DEPTH parameter was scaled incorrectly.
Navigating backward in the Sample browser highlighted the next entry in the list.
The currently selected bank in the pattern selection view sometimes did not show the bank that contained the active pattern.
Copying and pasting trigs from one subtrack to another could sometimes misplace the previously placed parameter locks.
Copying and pasting text in the naming window sometimes did not work as expected.
The FX SETUP menu page did not close when pressing [FUNC] + [FX].
THE MIDI machine could, under some circumstances, display an empty parameter page when first selected.
MIDI CC mappings for Bus, Send, and Mix tracks did not work.
TRACK LEVEL and TRACK ROUTING MIDI CC mappings did not work.
Parameter locks were sometimes displayed when selecting a track.
When pressing [FUNC] + [SAMPLING] and then releasing [FUNC] before [SAMPLING], the Recorder would open instead of the Sample browser.
When removing a parameter lock for a specific parameter it could only be performed with a fast DATA ENTRY knob press.
FX LFO depth did not have the correct range.
Clearing locks on a sequencer step did not clear micro-timing settings.
Pasting copied trigs sometimes lost the pasted data.
Correcting a typo in the “PERFORM MODE DEACTIVATED” message.
MIDI All Sound Off and All Notes Off messages were blocked by the Receive CC setting.
Pasting a copied track sequence discarded all sequencer events after the track’s current length.
Subtrack presets saved without a full kit of samples could not be loaded.
Page copy/paste/clear actions erronously also advanced the active page.
The PROB parameter on the TRIG PARAMETERS page was not cleared when performing a pattern clear operation.
It was possible to toggle PERFORM mode while the RESUMING PROJECT pop-up was open.
Modulation on the Voice LFO 2’s MULT parameter using the Modulation envelope was incorrectly scaled.
Selecting IN L or IN R as the sidechain source on a compressor that was placed on the Mix track did not work.
It was possible to erroneously add a sample to slot A000 after changing samples on a subtrack.
An incorrect toast message was displayed on screen when opening a MIDI SRC machine’s parameter pages.