To send the OS syx file, use our free Elektron Transfer software. Transfer can be downloaded from the Elektron website.

• Connect the Elektron device to the computer via USB and switch it on.

• Open the Transfer application on your computer.

• On the Transfer CONNECTION page, set the MIDI IN and MIDI OUT ports to your Elektron device.

• On the Transfer DROP page, drag and drop the OS file. The OS file is then automatically transferred to the Elektron device and the OS update initiates. A progress bar is visible on device screen when receiving the OS.

• On your device. Press [YES] to confirm the OS update.

If your current device OS does not fully support Transfer, you will be automatically directed to Transfer's LEGACY OS UPGRADE page after you drag and drop the OS file on the Transfer DROP page. Follow the instructions on the LEGACY OS UPGRADE page to proceed with the OS upgrade.

 When the update is done the unit will restart by itself.

• Connect the Elektron device to the computer via the device's MIDI port. (You cannot use the USB port).

• Hold down the [FUNC] button while powering on the Elektron device. This takes you to the STARTUP menu.

• Press the [TRIG 4] key to enter OS UPGRADE mode.

• Open the Transfer application on your computer.

• On the Transfer CONNECTION page, click "LEGACY OS UPGRADE mode"

• On the Transfer LEGACY OS UPGRADE mode page browse to, and select, the downloaded OS syx file.

• Select your MIDI interface.

• In Transfer, press "UPGRADE".

A progress bar is visible on device screen when receiving the OS.

 When the update is done the unit will restart by itself.

After some upgrades the bootstrap is also upgraded. This upgrade is performed right after the first restart of the device. Do not turn the power off during the upgrade.

Downgrading the device OS is not supported, and is performed at your own risk. User content may be lost.

Should you experience any problems or find any bugs, please report this to

Elektron support: http://www.elektron.se/support

Enjoy!

The Elektron development team

List of changes from OS 1.40 to 1.40A

Improvements

Saving a song to a project now works the same as saving a pattern to a project. After using SAVE TO PROJ in the SONG menu, the song is saved without needing to save the project afterward. However, the project needs to be saved before switching to another project to retain the changes.

Bug fixes

Latching FILL mode did not work.

The playhead (the red LED moving on the TRIG keys when the sequencer is running) was not visible when in KEYBOARD mode.

The MASTER parameter page always reverted to page 1/3 when switching track.

In SONG mode, queuing a pattern to play after the song is complete while a song row is repeating was ignored and instead the pattern playing on the song row kept playing after the song ended.

In SONG mode, if a song row was set to loop indefinitely, queuing another row to play did not have any effect since it was not prioritized over playing the indefinitely looping row.

In SONG mode, the swing setting from a queued song could be carried over and affect the currently playing song.

The graphical keyboard only indicated one pressed black key at a time even if multiple black keys were pressed.

The PATTERN menu could under some circumstances be accessed by pressing [FUNC]+[SONG MODE].

Keyboard mode could in some cases unexpectedly change to GRID RECORDING mode when switching tracks.

List of changes from OS 1.30B to 1.40

Improvements

Implemented Song mode. The [···] key has been re-purposed and is now the [SONG MODE] key. The PATTERN menu has been moved to the SETTINGS menu.

Updated the CHROMATIC mode with additional functionality, i.e., keyboard fold and scales.

Renamed options in the SOUND OPERATIONS menu in the SOUND MANAGER.
Import to TRK > Load to TRK
Export to here > Save to here

Bug fixes

The LFO waveform could sometimes be drawn with corrupt screen graphics.

Audio could in some cases clip when using Parametric EQ with negative gain.

Audio and sync could in some cases drop out when the device was used together with Overbridge.

The delay could not be unrouted from Main in the AUDIO ROUTING menu without also unrouting the reverb.

A parameter locked LFO destination was not always set correctly after loading a project that was last saved in an earlier OS.

Added external audio input functionality and a new EXTERNAL MIXER IN parameter page. The audio from INPUT L and R has also been added as sidechain sources for the compressor. Press [FUNC] + [LFO] (three times) to access the EXTERNAL MIXER IN page.

Added a base/width filter. The new filter is located on Filter Page 2.

Added parametric EQ as a new filter type.

Added a filter envelope delay parameter.

Added a second LFO. The second LFO is located on LFO Page 2.

Added the individual internal audio tracks as sample sources.

Extended the TUNE (sample pitch) parameter downward range to -60 semitones. The NOTE range is also changed to accommodate for the extended TUNE range. The added range also necessitated a change in which incoming MIDI notes triggering what note on the device. Middle C is now triggered on note 60 instead of note 36.

Added multi-track recording functionality in STEP RECORDING mode.

Added a GLOBAL FX/MIX menu item in the SETTINGS menu. In the GLOBAL FX/MIX menu, you have the option to set the parameters on the DELAY, REVERB, COMPRESSOR, INTERNAL MIXER, and EXTERNAL MIXER parameter pages to be global (making any change to these parameters affect all patterns in the project and not only the active pattern).

Implemented an intensity setting for the LEDs and OLED screen. The option is located in the SYSTEM menu.

Added an option for the device to remember which of a PARAMETER page's subpage you last used and access this page again next time you press the same [PARAMETER] key.

Updated the LFO UI and improved graphics for the WAVE and PHAS parameters.

The LFO Fade envelope now resets also in FREE mode when LFO.T is set to ON.

Improved UI graphics for bipolar parameters.

FILTER MODE set to OFF is now illustrated with a dotted line in the UI.

Improved the transition when changing between two filter types.

Incoming MIDI CC data for the FX parameters is now only received on the set FX CONTROL MIDI channel and not on the AUTO MIDI channel.

Parameter values could wrap around when quickly turning a pushed down encoder.

Shifting between FX/Master pages and parameter pages had inconsistent behavior.